- An Easy Way to Fix Windows10 Reboot Loop Problem 4 years 26 weeks ago
Are you annoyed by the computer stuck in restart loop? A lot of users may have encountered the Windows10 reboot loop problem! And why it occurs? The restart loop issue in computer also appears after Windows 10 system update and is showed up as the automatic reboot of the Windows system again and again in the boot process because of a device driver, a bad system component or a bad hardware. In a word, the computer can’t boot completely. How to get out of this kind of endless restart loop? This article will show you an easy way to solve the restart loop.
- 5 Solutions to Fix Getting Windows Ready Stuck in Windows 10 3 years 5 weeks ago
For many Windows 10 and Windows 8 users, they always unexpectedly experience an issue with their operating system. And they frequently get stuck on a loading screen with a message saying "Getting Windows ready. Don't turn off your computer".
Users report this issue on forums like Reddit, saying it often happens when they are trying to turn on, turn off or restart/reboot their computers. The following are some common situations:
1. Getting Windows ready boot loop, restarting loop, infinite loop, update loop,
2. Getting Windows ready after the restart
3. Frozen at Getting Windows ready
4. Getting Windows ready working on an update
5. Getting Windows ready stuck after update
In some cases, the time can extend to more than several hours, which may prove to be a nuisance for many users.
- How Do I Solve - Windows Automatic Repair Not Working 4 years 3 weeks ago
Windows Automatic Repair not working! How to solve Windows couldn't load correctly and Automatic Repair couldn't repair your PC?
FIX: Automatic Repair Windows Couldn't Load Correctly in Windows 10/8
Way 1. Restore PC to a Normal System State by Using System Restore Function
Generally speaking, the easiest and most effective way to fix Windows Automatic Repair not working issue is to click Restore button when you see the Windows couldn't load correctly error.
Then, Windows starts to revert to a previous system state and reboot. Finally, you have just one more thing to do: recover removed data files after system restore!
Way 2. Run Chkdsk Command to Fix Hard Disk & File System Issues
Sometimes, users are still stuck in startup repair infinite loop after using System Restore function. Now, they try running chkdsk to troubleshoot the Windows couldn't load correctly error, as shown in the following steps.
Insert the Windows bootable drive to your computer and boot from it.
Select your language preferences, and click Next.
Click Repair your computer.
Repair your computer
Choose Troubleshoot.
troubleshoot
Click Command Prompt.
Type chkdsk /r and press Enter.
chkdsk r
Type exit and press Enter.
Restart your computer and see if the Windows couldn't load correctly error disappeared.
Way 3. Run Bootrec Command to Rebuild Windows BCD
If you are still stuck in Automatic Repair with Windows couldn't load correctly error after trying the above 2 solutions, you can try rebuilding Windows' BCD.
Insert the Windows bootable drive and boot from it.
Click Repair your computer > Troubleshoot > Advanced Options > Command Prompt.
Type bootrec /fixmbr and press Enter.
Type bootrec /fixboot and press Enter.
Type bootrec /rebuildbcd and press Enter.
Restart your computer and see if the Windows couldn't load correctly error persists.
Fix: Windows 10/8 Automatic Repair Couldn't Repair Your PC
Way 1. Repair MBR and Rebuild the BCD
- Laptop Stuck on Preparing Automatic Repair during Startup (SOLVED) 3 years 31 weeks ago
Laptop stuck on Preparing Automatic Repair during startup! Windows has stuck on a screen with a message saying "Preparing Automatic Repair" or "diagnosing your PC"!
Solution 1. Perform a hard reboot
If your Windows cannot boot because of the "Preparing Automatic Repair" or "Diagnosing your PC" error, you can do a hard reboot. Remove the battery and AC adapter. Next, press and hold the power button for 20 seconds and see if it will boot up normally.
Solution 2. Boot into safe mode
You can try the below method to enter into safe mode when you encounter the Preparing Automatic Repair error in Windows 10/Windows 8/Windows 7.
Solution 3. Extend system reserved partition
If your computer's system reserved partition is smaller than it should be, you will get the "Preparing Automatic Repair" or "Diagnosing your PC" error message. Now, to fix this issue, you can try extending system reserved partition. Here, you can download MiniTool Partition Wizard to effectively complete this task.
Solution 4. Perform a startup repair
Some users recommend performing Startup Repair when the laptop is stuck on Preparing Automatic Repair during startup.
The steps are:
Insert the Windows bootable drive to your computer and boot from it.
Select your language preferences, and click on Next.
Click on Repair your computer.
Select Troubleshoot > Advanced Options > Startup Repair.
Solution 5. Rebuild BCD
If the boot files are missing or corrupted, you will receive the Preparing Automatic Repair error in Windows 10. Therefore, some users will re-build the boot record by following the below steps.
Step 1. Insert the Windows bootable installation disk into your PC which reports "Preparing Automatic Repair" or "Diagnosing your PC" error message.
Step 2. Boot your PC from the installation disk.
Step 3. Select your language preferences, and click on Next button to continue.
Step 4. Click on Repair your computer.
Step 5. Click on Troubleshoot.
- How to Start/Boot Windows 11 in Safe Mode? (7 Ways) 20 weeks 1 day ago
Windows 11 is a new operating system from Microsoft and it is currently available to Insider Preview users. If you have installed Windows 11 via Windows Insider Program in Windows 10 and use it for some time, you may have known about almost all the changes in this new system.
Because of the change of Windows settings, the ways to access the PC are different, including Safe Mode. Sometimes you may run into some problems that are not easy to identify or solve. Then, you can boot to Safe Mode for troubleshooting. In Safe Mode, Windows doesn’t load any third-party apps but only loads the required drivers.
Today, we will show you how to boot Windows 11 in Safe Mode. In the following part, 7 ways are listed.
- Top 4 Ways to Fix Windows 10 Endless Reboot Loop Effectively 3 years 18 weeks ago
Recently, many users have reported that their computers keep rebooting after Windows 10 update. This is a very annoying thing. If you are also the victim, you come to the right place. And here, we will give you some possible solutions to Windows 10 reboot loop in this post.
- 7 Solutions - Stuck on Welcome Screen Windows 10/8/7 3 years 40 weeks ago
Windows 10/8/7 stuck on welcome screen? How to solve it?
Method 1. Disconnect Your USB Devices
No doubt, some users like using all sorts of USB devices such as the mouse, keyboard, speakers, Bluetooth speakers, USB dongles, USB Wi-Fi adapters etc. However, these connected devices might cause the Windows 7 stuck on welcome screen for a long time issue. Therefore, a common solution to the problem is to disconnect all externally connected devices from your PC.
Method 2. Disconnect from the Internet
According to users, sometimes Windows 10 gets stuck on the login screen because it's trying to connect to your wireless connection. If your Windows gets stuck on welcome screen, you should make sure that you are not connected to the internet before proceeding to log in.
Method 3. Perform an Automatic Repair
Some users are reporting that they can fix the startup issues including Windows 10 freezes on startup, Windows 7 hangs on welcome screen, PC turns on but no display and others by performing an Automatic Repair.
Method 4. Run system checks
In some case, corrupt system files on your computer will cause this problem – stuck on welcome screen Windows 10/8/7. Therefore, to fix the Windows 10 freezes on startup problem, you can use CHKDSK to run some checks on your computer to see if it is the corrupted files that cause your startup problem.
Method 5. Restart Windows Update service
You can try restarting Windows Update service and then rename few files if you still get the stuck on welcome screen Windows 10 issue.
Step 1. Open command prompt. (Refer to the steps in method 4.)
Step 2. Type net stop wuauserv in the run dialogue and press Enter.
Step 3. Type cd %systemroot% command and press Enter.
Step 4. Type ren SoftwareDistribution SD.old and press Enter.
Step 5. Type net start wuauserv and press Enter.
Step 6. Type exit and press Enter to close Command Prompt and restart your PC.
